Aluminium and PVC Window Maintenance: 10 Practical Tips
Maintenance & Repair

Aluminium and PVC Window Maintenance: 10 Practical Tips

By Tecnisun C.B.

Why Window Maintenance Is Essential

Your windows are the barrier between your home's comfort and the outside world. In the climate of Granada and Malaga, with thermal ranges exceeding 45°C between summer and winter, extreme temperatures, wind, rain, and — on the Malaga coast — ambient salinity, your windows work hard to keep you comfortable. Proper maintenance ensures they continue doing so reliably for decades to come, protecting your investment.

Quality windows can last 30, 40, or even 50 years. But to maintain their performance throughout their entire lifespan, they need basic periodic maintenance that many homeowners neglect. The good news is that modern aluminium RPT and PVC windows require very little upkeep — just 2-3 hours per year.

50+Years of lifespan with proper maintenance
2-3hAttention needed per year
100%Performance maintained
💡
Did you know?

At Tecnisun C.B. we not only manufacture and install PVC and aluminium STRUGAL windows; we also offer professional maintenance plans so you never have to worry about upkeep.

Tip 1: Regular Profile Cleaning

🪟

PVC Profiles

Warm water with neutral soap, soft cloth, rinse and dry with microfibre. Never use solvents, acetone or abrasives.

🔩

Lacquered Aluminium Profiles

Same technique: water with neutral soap and soft cloth. For stubborn stains, use a specific cleaner. Avoid metallic scouring pads.

⚠️
Important

Recommended frequency: every 3-4 months, or monthly if your home is near the coast (salt spray is aluminium's worst enemy). In Malaga's coastal areas, monthly cleaning is essential.

Tip 2: Glass Cleaning and Inspection

Good glass cleaning is not just about aesthetics — it is an opportunity to inspect your glazing for problems that could worsen if left untreated. Clean glass lets more light in and helps you spot issues early.

Good glass cleaning improves light entry and allows you to detect problems such as cracks, condensation between panes, or deterioration of the perimeter seal.

  • Use commercial glass cleaner or a water-vinegar mix
  • Apply with microfibre cloth or newspaper
  • Always clean from top to bottom to avoid drip marks
  • Check inside the double glazing chamber: if there is mist or moisture, the seal has failed and needs professional replacement

Tip 3: Hardware Lubrication

The hardware is the mechanical heart of the window. Poorly lubricated hardware can wear out prematurely, leading to costly repairs.

ElementDescriptionFrequency
Locking pointsCams and strikes that ensure airtight closureOnce/year
HingesUpper and lower on casement windowsOnce/year
Espagnolette/handleInternal mechanism activating locking pointsOnce/year
Sliding tracksGuide rails for sliding leavesOnce/year
Tip

Use WD-40 or similar spray lubricant. For sliding tracks, use silicone spray lubricant. Never use thick grease that accumulates dirt. Best timing: once a year at the start of autumn.

Tip 4: Weatherseal Inspection

The rubber gaskets (EPDM) are responsible for water and air tightness. Over time they can dry out or deform, compromising your window's performance.

  • Visually inspect seals at least once a year
  • Look for cracks, flattening or detached sections
  • Apply a rubber renewal product to maintain elasticity
  • If a seal is damaged, replace it — a simple, inexpensive operation for a professional (€30-60 per window)

Tip 5: Hardware Adjustment

With use, hardware may need small adjustments to maintain optimal closure. This is particularly important in Granada, where the wide temperature range causes thermal expansion and contraction of profiles throughout the year.

Signs You Need Adjustment

  • The handle moves with difficulty or feels loose
  • The leaf rubs against the frame when opening or closing
  • You feel a draught with the window closed
  • The leaf is not fully aligned with the frame
  • The locking points do not engage fully (you can hear wind)

Most adjustments can be made with a simple Allen key on the hinge and locking point mechanisms. If you are not comfortable doing this yourself, our maintenance team can adjust all windows in your home in under 2 hours.

With use, hardware may need small adjustments to maintain optimal closure. Signs you need adjustment: the handle moves with difficulty or is loose, the leaf rubs against the frame, you feel a draught with the window closed, or the leaf is not fully aligned with the frame.

Tip 6: Drainage Channel Cleaning

All windows have small drainage holes at the bottom of the frame to evacuate rainwater. If blocked, water accumulates and can cause leaks. Clean with a toothpick, fine brush, or compressed air. Check water flows correctly. Recommended frequency: twice a year, before rainy seasons (autumn and spring).

Tip 7: Shutter and Blind Care

🔲

Roller shutters

Clean slats with a damp cloth. Lubricate belt or motor mechanism once a year. Never force if stuck — call a professional.

🪟

SAXUN Screen Blinds

Clean fabric per manufacturer instructions. Check actuation mechanism annually. SAXUN blinds are low-maintenance by design.

📦

Shutter boxes

Critical insulation point. Check they close properly with no gaps or draughts. A poorly sealed shutter box can account for 15% of heat loss.

Tip 8: Perimeter Silicone Inspection

The seal between the window frame and the wall is fundamental for preventing air and water leaks. Visually check for cracks or detachment. If you find faults, remove old silicone and apply a new layer with neutral silicone. This is a job most handy homeowners can do, but for guaranteed results, our maintenance team handles it professionally.

Tip 9: Protection During Building Works

  • Cover profiles with plastic and masking tape
  • Remove plaster or cement splashes immediately with water
  • Do not lean ladders or heavy materials against profiles
  • Protect glass with plastic or cardboard

Tip 10: When to Call a Professional

💧

Condensation between panes

The chamber seal has failed. Needs glazing replacement (not the whole window). Cost: €150-350.

🔧

Broken hardware

A professional can replace hardware without changing the entire window. Cost: €80-250.

🌧️

Persistent leaks

May indicate an installation problem or advanced wear. Professional diagnosis essential.

🚫

Windows that won't close

If basic adjustments don't solve the problem, there may be leaf sag requiring professional re-alignment.

Prefer a Professional to Handle Your Maintenance?

At Tecnisun C.B. we offer annual maintenance plans for aluminium and PVC windows. Complete inspection, hardware adjustment, lubrication and seal replacement. Our own technical service with over 30 years of experience. Request information about maintenance plans or call 627 84 14 04.

See maintenance service →

Common Mistakes That Shorten Window Life

MistakeConsequenceSolution
Using bleach or ammonia on PVCDiscolouration and material embrittlementOnly water + neutral soap
Never lubricating hardwarePremature wear, part breakage (repair: €150-300)Lubricate once/year with WD-40
Forcing a stiff windowLeaf sag, hinge breakageAdjust with Allen key or call technician
Ignoring condensation between panesTotal loss of chamber insulationReplace double glazing (not the whole window)

Special Maintenance for Malaga Coastal Homes

Homes near the sea (within 5 km of the coast) require special attention due to ambient salinity:

  • Monthly cleaning of profiles with fresh water to remove salt residue
  • Quarterly lubrication of hardware (double the inland frequency)
  • Six-monthly inspection of seals and sealants (salt accelerates degradation)
  • Qualicoat Seaside treatment mandatory on new aluminium profiles
  • Consider PVC windows for maximum corrosion resistance

Tecnisun Maintenance Plans

PlanFrequencyIncludesPrice
BasicAnnualInspection, adjustment, hardware lubrication, channel cleaning, seal checkFrom €120
CompleteSix-monthlyAll above + sealant check, closure pressure adjustment, professional profile cleaningFrom €200
PremiumQuarterlyAll above + shutter/blind check, professional glass cleaning, preventive seal replacementFrom €350

Seasonal Maintenance Checklist

🌸

Spring

General cleaning of profiles and glass. Seal inspection. Drainage channel cleaning.

☀️

Summer

Check blinds and shutters. Ensure solar control glass is clean for maximum efficiency.

🍂

Autumn

Hardware lubrication. Perimeter sealant check. Channel cleaning before rains.

❄️

Winter

Verify airtight closure. Check for condensation. Inspect shutter boxes for draughts.

Repair Costs for the Most Common Issues

Knowing the cost of typical repairs helps you appreciate the value of preventive maintenance:

RepairEstimated CostAvoidable with Maintenance?
EPDM seal replacement€30-60/windowYes (rubber renewal product)
Hardware adjustment€40-80/windowYes (annual lubrication)
Espagnolette replacement€120-250Partially (lubrication)
Hinge replacement€80-180Yes (lubrication + adjustment)
Double glazing replacement€150-350/windowNo (seal failure inevitable long-term)

As you can see, most common repairs are avoidable with 2-3 hours of basic annual maintenance. A Tecnisun professional maintenance plan always costs less than a single hardware repair.

When to Replace Instead of Repair

Maintenance extends lifespan, but there comes a point when repair is no longer worthwhile. Signs you need new windows:

🪟

Aluminium without RPT

If your windows are aluminium without thermal break (most installed before 2005), no maintenance can improve their energy efficiency. Worth replacing with PVC or STRUGAL aluminium RPT.

💧

Constant condensation

If glass fogs up inside in winter, insulation is insufficient. Maintenance cannot fix a design or material problem.

🔧

Unrecoverable hardware

If hardware is too corroded or deformed to adjust or replace, the entire window needs replacing.

🌬️

Permanent draughts

If air still enters after adjusting hardware and replacing seals, the profile may be warped or installation faulty.

In these cases, the 2026 Plan Renove subsidies cover up to 40% of replacement cost. Contact us for a free diagnosis.

Prefer to Leave It to the Experts?

Tecnisun maintenance plans give you peace of mind knowing everything is in order. They include a written diagnosis report and priority service for urgent repairs. Available throughout Granada and Malaga provinces.

Enquire about maintenance plans →
mantenimiento ventanaslimpieza ventanasherrajes ventanasjuntas estanqueidadconsejos mantenimientoaluminioPVC
Completed project
Free quote

Need professional advice?

Request your free, no-obligation quote. Our team will help you find the best solution.